Mounted unit is a bearing unit that combines insert bearing with housing, it is also called mounted bearing or mounted bearing unit. Most insert bearings are made with a spherical outer diameter and are installed in the bearing housings. They have various structural forms, good versatility and interchangeability. And this type of bearing unit also has a self-aligning function in the design, which can be replenished with grease and easy to install and use. It has a double structure sealing device, which can work in harsh environments. Bearing housings of mounted units are usually made of cast iron. Usually, the bearing housing can be with a flange, and may be either split type or solid type.
Spherical bearing is a spherical sliding bearing, its sliding contact surface is an inner spherical surface and an outer spherical surface, movement can swing in any Angle of rotation, it adopts the surface phosphating, blasting, gasket, spraying and other special processing methods produced.Joint bearing has the characteristics of large load capacity, impact resistance, corrosion resistance, wear resistance, self-aligning and good lubrication.
Rod end is a special kind of spherical bearing, the basic type is composed of an inner ring and an outer ring with a spherical sliding spherical contact surface.The rod ends is mainly composed of an inner ring with an inner spherical surface and an outer ring with an inner spherical surface.According to its different types and structures, it can bear radial load, axial load or combined load in both radial and axial directions.Since the outer surface of the inner ring is lined with composite materials, the bearing can generate self-lubrication in operation.
